DLC Card Update

The DLC card may be updated using a PC connected to the card with a micro USB cable.

• Download the update zip file from the link below.

DLC Card Ver: 1.00.017 October 21, 2021

• Unzip the update package to a location on the PC such as Downloads.
• Power off the 825.
• Connect the USB cable to the PC and DLC card.
• Power on the 825.
• Run the 825DLC.bat file that was unzipped previously.
• If " ERROR " appears on the PC check that the USB cable is connected to the PC and option card. Power the 825 off, wait a minute, power on, then try again.
• The update will take several minutes. Do not disconnect until the "Press any key to continue..." display appears on the PC.
• Power off the 825. Disconnect the USB cable from the DLC card and the PC. Power on the 825. The updated card version will show on the startup screen.