Changes between Version 14 and Version 15 of Docs/User/RemoteControl

Timestamp:

10/31/14 08:40:14 (10 years ago)

Author:

Don Wilson

Comment:

--

Docs/User/RemoteControl

@@ -5 +5 @@
 To connect locally (from the same wired or wifi network) the client will use the IP address that the 825 shows at the bottom of the "Application Menu". It is recommended to set the network router for "Static DHCP" (many routers use different terms for this) so that the 825 is always assigned the same IP address based on its MAC address. 
 
-To connect from the public internet it is necessary to setup port forwarding in the network router. Consult your router documentation for how to do this. In this case the client must use the public IP assigned by the server provider. This can be determined from a device with a web browser connected to the same network as the 825 by going to [http://www.whatismyip.com http://www.whismyip.com]
+To connect from the public internet it is necessary to setup port forwarding in the network router. Consult your router documentation for how to do this. In this case the client must use the public IP assigned by the internet service provider. This can be determined from a device with a web browser connected to the same network as the 825 by going to [http://www.whatismyip.com http://www.whismyip.com]
 
 === PC Client Software ===