Changes between Version 3 and Version 4 of Docs/825gen2/Dev/Devices/HDMI


Ignore:
Timestamp:
03/09/24 07:03:55 (8 months ago)
Author:
Don Wilson
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • Docs/825gen2/Dev/Devices/HDMI

    v3 v4  
    88||HDMI Only||LCD display is inactive - User interface is on HDMI output||
    99||LCD and HDMI||User interface is on LCD, Apps may utilize HDMI output for display of images or video||
     10
     11The 825gen2 display less version has no built-in LCD display. However, the initial image sets the unit LCD mode so it is necessary to change the unit to HDMI mode without being able to see the display.
     12
     131. Plug in a USB keyboard to the 825gen2.
     142. Power on the unit.
     153. After initial startup beeps and within five seconds press ALT-F5 on the USB keyboard. This initiates the display change mode. A sequence of beeps will sound to confirm the command was received.
     164. Press ALT-F8 within five seconds of hearing the response to ALT-F5. This specifies the desired display mode HDMI. (Alternatively, ATL-F7 may be used to return to LCD mode).
     175. Press ALT-F4 within five seconds of hearing the previous response. This saves the desired display change. A sequence of beeps will sound and then the 825gen2 will shutdown.
     186. Wait a minute after hearing the response to ALT-F4 and then cycle power to restart the 825gen2.
     19