Changes between Version 39 and Version 40 of Docs/User/RemoteControl

Timestamp:

02/13/25 08:53:40 (10 days ago)

Author:

Don Wilson

Comment:

--

Docs/User/RemoteControl

@@ -1 +1 @@
 == 825 Gen2 Remote Control ==
 
-To enable remote control on an 825 indicator from the startup select "Legal metrology information / Setup", then "Setup menu". Select "Communication" then "Network". Select "Services". Make sure the "Remote Control" option is set to "Yes". Press ENTER to save changes.  
+To enable remote control on an 825 Gen2 indicator from the startup select "Legal metrology information / Setup", then "Setup menu". Select "Communication" then "Network". Select "Services". Make sure the "Remote Control" option is set to "Yes". Press ENTER to save changes.  
 
 Microsoft Remote Desktop client may be used to access the 825 Gen2. To connect locally (from the same wired or wifi network) the remote desktop client will use the IP address that the 825 shows at the bottom of the "Application Menu". It is recommended to set the network router for "Static DHCP" (many routers use different terms for this) so that the 825 is always assigned the same IP address based on its MAC address. Otherwise, the 825 network settings may be configured for a static IP (Be careful that the static IP address used is not assigned to another device, or within the DHCP range that the router might assign to devices automatically).
@@ -33 +33 @@
 [[Image(RemoteWeigh.png)]]
 
-[https://itunes.apple.com/us/app/remoteweigh/id692782046?ls=1&mt=8 The Cardinal RemoteWeigh app includes the ability to remote control 825 indicators.]
+[https://itunes.apple.com/us/app/remoteweigh/id692782046?ls=1&mt=8 The Cardinal RemoteWeigh app includes the ability to remote control legacy 825 indicators.]
 To allow custom fonts and bitmaps the 825 OS must be at least 1.12.023, web server enabled and the web server port specified in the app settings after the remote control port with comma separation, for example: "Port: 1100,80".