Context Navigation

RemoteControl

v16	v17
7	7	To connect from the public internet it is necessary to setup port forwarding in the network router. Consult your router documentation for how to do this. In this case the client must use the public IP assigned by the internet service provider. This can be determined from a device with a web browser connected to the same network as the 825 by going to [http://www.whatismyip.com http://www.whismyip.com]
8	8
9		The 825 indicator is only accessibly by remote control while in the application mode. Remote control may not be used for calibration/setup functions.
	9	The 825 indicator is only accessible by remote control while in the application mode. Remote control may not be used for calibration/setup functions.
10	10
11	11	=== PC Client Software ===