| 44 | | [wiki:///Docs/User/FullUpdate/VersionHistory/OptionCards Click this link for option card information.] |
| | 44 | The DLC card may be updated using a PC connected to the card with a micro USB cable. |
| | 45 | * Download the appropriate update zip file from the link below. |
| | 46 | [https://drive.google.com/file/d/1bvYMmYfKkPsnbWweeBCZAcJsf2a6K93z/view?usp=sharing Ver: 1.00.001 October 29, 2018] |
| | 47 | * Unzip the update package to a location on the PC such as Downloads. |
| | 48 | * Power off the 825. |
| | 49 | * Connect the USB cable to the PC and DLC card. |
| | 50 | * Power on the 825. |
| | 51 | * Run the 825DLC.bat file that was unzipped previously. |
| | 52 | * If "** ERROR **" appears on the PC check that the USB cable is connected to the PC and option card. Power the 825 off, wait a minute, power on, then try again. |
| | 53 | * The update will take several minutes. Do not disconnect until the "Press any key to continue..." display appears on the PC. |
| | 54 | * Power off the 825. Disconnect the USB cable from the DLC card and the PC. Power on the 825. The updated card version will show on the startup screen. |
| | 55 | |
![(please configure the [header_logo] section in trac.ini)](/chrome/site/cardinal.gif)
