Changes between Version 49 and Version 50 of Docs/User/FullUpdate

Timestamp:

08/22/14 15:37:37 (10 years ago)

Author:

Don Wilson

Comment:

--

Docs/User/FullUpdate

@@ -24 +24 @@
 1. Make sure the 825 is powered off. Remove the four acorn nuts securing the bottom access cover and remove the cover to reveal the USB and network connections.
 
-2. Turn on the 825. Select "Application Mode". Watch the display carefully. When the display shows "U = Update" press the "U" button on the 825 keypad. '''(If "U = Update" does not appear your indicator may have an older OS - refer to "Advanced Updating" then repeat this process after the OS is updated)'''.
+2. Turn on the 825. Select "Application Mode". Watch the display carefully. When the display shows "U = Update" press the "U" button on the 825 keypad. If ">>>>>>" is seen instead of "U = Update" the update prompt is disabled in the loader settings "Preferences" and "Startup Setup". '''(If "U = Update" does not appear your indicator may have an older OS - refer to "Advanced Updating" then repeat this process after the OS is updated)'''.
 
 3. The display may prompt for a login. If the login has not been changed use the default administrator login: "ADMIN" and "81440".