Changes between Version 34 and Version 35 of Docs/User/FullUpdate


Ignore:
Timestamp:
07/18/12 14:59:46 (12 years ago)
Author:
Don Wilson
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • Docs/User/FullUpdate

    v34 v35  
    3939
    4040
    41 == Updating just the OS ==
    42 
    43 '''WARNING: Insure that reliable power is available before attempting the upgrade. A power interruption during the upgrade process could render the 825 inoperable and require return of the 825 to the factory for reprogramming! '''
    44 
    45 1. Make sure the 825 is powered off. Remove the four acorn nuts securing the bottom access cover and remove the cover to reveal the USB and network connections.
    46 
    47 2. Turn on your 825. Select "Application Mode". Wait for the "Application Menu" to appear.
    48 
    49 3. If the "File Manager" option is not present in the menu select "Configuration". The display may prompt for a login. If the login has not been changed use the default administrator login: "ADMIN" and "81440". Select "Configure menu". Select "Enable/Disable menu items". Select "File Manager" and press "Y" to select "Yes" to include this in the menu. Press "ENTER". Press the "Left arrow" navigation key twice to return to the "Application Menu".
    50 
    51 4. Insert the USB flash drive previously configured for 825 updating. Be careful to insert it in the correct orientation into either of the USB slots.
    52 
    53 5. Select the "File Manager" option in the "Application Menu". The display may prompt for a login. If the login has not been changed use the default administrator login: "ADMIN" and "81440".
    54 
    55 6. Press "P" for paths to select the paths for the file manager to display. At the "1:" prompt type: "/mnt/fl1" (without the quotes - press "SHIFT" twice to lock in lower case mode). Press "ENTER".
    56 
    57 7. The left side of the display should show "/mnt/fl1" and the contents of your flash drive. ''If the files do not show the path may have been typed incorrectly. Repeat the previous step.''
    58 
    59 8. Press the "DOWN" navigation key repeatedly until the OS file "image.bin" is highlighted. Press "ENTER".
    60 
    61 9. The display will show "Are you sure you want to flash selected files. - Confirm No". Press "Y" to select "Yes" and press "ENTER".
    62 
    63 10. The display will show "Update FLASH" and prompt whether to replace the existing OS version with the version of the image.bin file. If the version number is correct press "Y" to proceed.
    64 
    65 11. The display will show "Erasing" and then count through all records as the file is being programmed. This may take a few minutes.
    66 
    67 12. When finished the display will show "Done". Press "ENTER". The file manager will return. Press the left navigation key until the display shows "Return to Startup?". Press "Y" and "ENTER". The display will show "restarting" and the startup screen should show with the correct "OS" version that the indicator was updated to.
    6841
    6942== Manual Reinstall of the OS ==