Changes between Version 33 and Version 34 of Docs/User/FullUpdate

Timestamp:

07/18/12 14:41:48 (12 years ago)

Author:

Don Wilson

Comment:

--

Docs/User/FullUpdate

@@ -15 +15 @@
 [[Image(safely_remove_usb.png)]]
 
-== Clearing NAND and Performing a FULL Update ==
+== Performing a FULL Update ==
 
-'''WARNING: This will overwrite all files on the 825. BACKUP ANY FILES YOU WISH TO KEEP! '''
+'''WARNING: BACKUP ANY FILES YOU WISH TO KEEP! '''
 
 '''WARNING: Insure that reliable power is available before attempting the upgrade. A power interruption during the upgrade process could render the 825 inoperable and require return of the 825 to the factory for reprogramming! '''
@@ -32 +32 @@
 5. The display will show "Insert USB flash containing /upd825.sh - Press any key". Insert the USB flash drive previously configured for 825 updating. Be careful to insert it in the correct orientation into either of the USB slots. After the USB flash drive is properly inserted press any key such as the "ENTER" key on the 825 keypad.
 
-6. The display will show "Mounting USB flash" and if successfull will then show "Perform full ERASE and Update (Y/N)?". Press "Y" to perform a full erase and reprogram. The display will show "Clearing NAND", "Creating directories", "Copying..." This may take several minutes. If "N" is selected the NAND memory will not be erased and the indicator will prompt (Y/N) for each step of the update sequence.
+6. The display will show "Mounting USB flash" and if successfull will then show "UPDATE FLASH", "Replace:" and show "Loader", "OS", and "Main Bd" with "Yes" or "No" shown to the right of each. If they are not all showing "Yes" the Up/Down navigation keys may be used to highlight each item and press "Y" to change the selection to "Yes". Press ENTER. The display will show "Checking file CRC..." When finished it will show "* DO NOT TURN OFF POWER DURING UPDATE *" and "Proceed (Y/N)?". Press "Y" to proceed.
 
-7. When finished the "File Manager" display may appear. Press "SHIFT" then "ESC" on the 825 keypad. The "Application Menu" should appear.
+7. The display will show counts as the update is performed. It may take 10 minutes or more. When finished the display will show "Done". Remove the USB flash drive. Press a key and the 825 will reboot.
 
-8. Press the "Left Arrow" navigation key. The display will show "Return to Startup?" Press "Y" and "ENTER". The display will show "Restarting" briefly and then the 825 startup screen will appear. The "Loader:" "OS:" and "Mainboard" version displays should show the correct updated version numbers.
+8. The display will show "Restarting" briefly and then the 825 startup screen will appear. The "Loader:" "OS:" and "Mainboard" version displays should show the correct updated version numbers.