Changes between Version 22 and Version 23 of Docs/User/FullUpdate

Timestamp:

08/04/10 10:53:19 (14 years ago)

Author:

Don Wilson

Comment:

--

Docs/User/FullUpdate

@@ -5 +5 @@
 == Configuring a USB flash drive for 825 updating ==
 
-1. [http://tech.825spectrum.com/trac/raw-attachment/wiki/Docs/User/FullUpdate/update825-2010-07-22.zip Download] the Cardinal 825 update pack. This is a zip file that contains all the files needed to upgrade your indicator to the latest software. Insert a USB flash drive into one of the USB ports on the computer.
+1. [http://tech.825spectrum.com/trac/raw-attachment/wiki/Docs/User/FullUpdate/update825-2010-08-04.zip Download] the Cardinal 825 update pack. This is a zip file that contains all the files needed to upgrade your indicator to the latest software. Insert a USB flash drive into one of the USB ports on the computer.
 
 2. Unzip the contents of the zip file to a USB flash drive. For example, if your flash drive is drive F: then you would unzip the contents of zip file to root directory of the F: drive. If you are using Windows XP right-click the zip file and select "Extract All..." Click "Next". Click "Browse..." Select "My Computer" and then select the appropriate drive letter of your flash drive. Click "OK." Click "Next". Click "Finish".
@@ -32 +32 @@
 5. The display will show "Insert USB flash containing /upd825.sh - Press any key". Insert the USB flash drive previously configured for 825 updating. Be careful to insert it in the correct orientation into either of the USB slots. After the USB flash drive is properly inserted press any key such as the "ENTER" key on the 825 keypad.
 
-6. The display will show "Mounting USB flash" and if successfull will then show "Clearing NAND", "Creating directories", "Copying..." This may take several minutes.
+6. The display will show "Mounting USB flash" and if successfull will then show "Perform full ERASE and Update (Y/N)?". Press "Y" to perform a full erase and reprogram. The display will show "Clearing NAND", "Creating directories", "Copying..." This may take several minutes. If "N" is selected the NAND memory will not be erased and the indicator will prompt (Y/N) for each step of the update sequence.
 
 7. When finished the "File Manager" display may appear. Press "SHIFT" then "ESC" on the 825 keypad. The "Application Menu" should appear.