Changes between Version 20 and Version 21 of Docs/User/FullUpdate

Timestamp:

07/23/10 07:48:45 (14 years ago)

Author:

Don Wilson

Comment:

--

Docs/User/FullUpdate

@@ -65 +65 @@
 11. The display will show "Erasing" and then count through all records as the file is being programmed. This may take a few minutes.
 
-12. When finished the display will show "Done". Press "ENTER". The file manager will return. Press the left navigation key until the display shows "Return to Startup?". Press "Y" and "ENTER". The display will show "restarting" and the the startp screen should show with the correct "OS" version that the indicator was updated to.
+12. When finished the display will show "Done". Press "ENTER". The file manager will return. Press the left navigation key until the display shows "Return to Startup?". Press "Y" and "ENTER". The display will show "restarting" and the startup screen should show with the correct "OS" version that the indicator was updated to.
 
 == Manual Reinstall of the OS ==
@@ -81 +81 @@
 5.Select “Update Software Menu”. Select “Settings”. Set the “Server IP” to the IP address of the Windows PC running the tftpserver. Set “File Type” to “3” or “bin”. Set the “Filename” to “image.bin”. The prompts “1.” Through “6.” Allow a kernel command line to be specified. For example, if you want kernel messages to appear on COM2 to set “1.” to “console=ttyS1”. (“console=null” suppresses kernel messages, or blank provides kernel messages on “COM1”) Press “ENTER” to save changes. 
 
-6.Select “Download kernel to flash”. The display will show “Downloading Image ‘image.bin’ from 192.168.0.5 (or the appropriate IP address of the server). This may take a few minutes are the kernel is downloaded into RAM. After a brief delay the display will show “DO NOT UNPLUG OR SWITCH OFF POWER”. The NOR flash area to contain the kernel will then be erased and the kernel will be written to flash. This may take several minutes. The display will show “Power off and back on”. (Older versions of the bootloader may show “Press any key”, but still require a power off and on). 
+6.Select “Download kernel to flash”. A warning message may appear. If everything is configured correctly press "Y" to proceed.  The display will show “Downloading Image ‘image.bin’ from 192.168.0.5 (or the appropriate IP address of the server). This may take a few minutes are the kernel is downloaded into RAM. After a brief delay the display will show “DO NOT UNPLUG OR SWITCH OFF POWER”. The NOR flash area to contain the kernel will then be erased and the kernel will be written to flash. This may take several minutes. The display will show “Power off and back on”. (Older versions of the bootloader may show “Press any key”, but still require a power off and on). 
 
 7.Power off and on the indicator.