![(please configure the [header_logo] section in trac.ini)](/chrome/site/cardinal.gif)
Changes between Version 9 and Version 10 of Docs/User/FullUpdate
- Timestamp:
- 06/29/10 09:16:58 (14 years ago)
Legend:
- Unmodified
- Added
- Removed
- Modified
-
Docs/User/FullUpdate
v9 v10 3 3 '''WARNING: This will overwrite all files on the 825. BACKUP ANY FILES YOU WISH TO KEEP! ''' 4 4 5 '''WARNING: Insure that reliable power is available before attempting the upgrade. A power interruption during the upgrade process could render the 825 inoperable and require return to the factory for reprogramming! '''5 '''WARNING: Insure that reliable power is available before attempting the upgrade. A power interruption during the upgrade process could render the 825 inoperable and require return of the 825 to the factory for reprogramming! ''' 6 6 7 7 If you have an indicator that is out of date and you want to do a complete upgrade follow the instructions below. 8 8 9 9 1. [http://tech.825spectrum.com/trac/raw-attachment/wiki/Docs/User/FullUpdate/update825-2010-06-28.zip Download] the Cardinal 825 update pack. This is a zip file that contains all the files needed to upgrade your indicator to the latest software. 10 10 11 2. Unzip the contents of the zip file to a USB thumb drive. For example, if you're thumbdrive is drive F:\ then you would unzip the contents of zip file to F:\.11 2. Unzip the contents of the zip file to a USB flash drive. For example, if your flash drive is drive F:\ then you would unzip the contents of zip file to F:\. 12 12 13 13 3. After the files are unzipped you should have a several files and a subfolder named "nand" your flash drive. 14 14 15 15 4. Make sure the 825 is powered off. Remove the four acorn nuts securing the bottom access cover and remove the cover to reveal the USB and network connections. 16 16 17 5. Turn on your825. Select "Application Mode". Watch the display carefully. When the display shows "U = Update" press the "U" button on the 825 keypad. '''(If "U = Update" does not appear your indicator may have an older OS - refer to "Updating just the OS" then repeat this process after the OS is updated)'''.17 5. Turn on the 825. Select "Application Mode". Watch the display carefully. When the display shows "U = Update" press the "U" button on the 825 keypad. '''(If "U = Update" does not appear your indicator may have an older OS - refer to "Updating just the OS" then repeat this process after the OS is updated)'''. 18 18 19 19 6. The display may prompt for a login. If the login has not been changed use the default administrator login: "ADMIN" and "81440". 20 20 21 8. The display will show "Update from USB flash? (Y/N)". Press "Y".21 7. The display will show "Update from USB flash? (Y/N)". Press "Y". 22 22 23 9. The display will show "Insert USB flash containing /upd825.sh - Press any key". Insert the USB flash drive. Be careful to insert it in the correct orientation into either of the USB slots. After the USB flash drive is properly inserted press any key such as the ENTERkey on the 825 keypad.23 8. The display will show "Insert USB flash containing /upd825.sh - Press any key". Insert the USB flash drive. Be careful to insert it in the correct orientation into either of the USB slots. After the USB flash drive is properly inserted press any key such as the "ENTER" key on the 825 keypad. 24 24 25 10. The display will show "Mounting USB flash" and if successfull will then show "Clearing NAND", "Creating directories", "Copying..." This may take several minutes.25 9. The display will show "Mounting USB flash" and if successfull will then show "Clearing NAND", "Creating directories", "Copying..." This may take several minutes. 26 26 27 1 1. When finished the "File Manager" display may appear. Press "SHIFT" then "ESC" andthe 825 keypad. The "Application Menu" should appear.27 10. When finished the "File Manager" display may appear. Press "SHIFT" then "ESC" on the 825 keypad. The "Application Menu" should appear. 28 28 29 1 2. Press the "Left Arrow" navigation key. The display will show "Return to Startup?" Press "Y" and "ENTER". The display will show "Restarting" briefly and then the 825 startup screen will appear. The "Loader:" "OS:" and "Mainboard" version displayshould show the correct updated version numbers.29 11. Press the "Left Arrow" navigation key. The display will show "Return to Startup?" Press "Y" and "ENTER". The display will show "Restarting" briefly and then the 825 startup screen will appear. The "Loader:" "OS:" and "Mainboard" version displays should show the correct updated version numbers. 30 30 31 31 32 32 = Updating just the OS = 33 33 34 34 1. [http://tech.825spectrum.com/trac/raw-attachment/wiki/Docs/User/FullUpdate/update825-2010-06-28.zip Download] the Cardinal 825 update pack. This is a zip file that contains all the files needed to upgrade your indicator to the latest software. 35 35 36 2. Unzip the contents of the zip file to a USB thumb drive. For example, if you're thumbdrive is drive F:\ then you would unzip the contents of zip file to F:\.36 2. Unzip the contents of the zip file to a USB flash drive. For example, if your flash drive is drive F:\ then you would unzip the contents of zip file to F:\. 37 37 38 3. After the files are unzipped you should have aseveral files and a subfolder named "nand" your flash drive. The OS file is called "image.bin".38 3. After the files are unzipped you should have several files and a subfolder named "nand" your flash drive. The OS file is called "image.bin". 39 39 40 40 4. Make sure the 825 is powered off. Remove the four acorn nuts securing the bottom access cover and remove the cover to reveal the USB and network connections. 41 41 42 42 5. Turn on your 825. Select "Application Mode". Wait for the "Application Menu" to appear. 43 43 44 44 6. If the "File Manager" option is not present in the menu select "Configuration". The display may prompt for a login. If the login has not been changed use the default administrator login: "ADMIN" and "81440". Select "Configure menu". Select "Enable/Disable menu items". Select "File Manager" and press "Y" to select "Yes" to include this in the menu. Press "ENTER". Press the "Left arrow" navigation key twice to return to the "Application Menu". 45 45 46 7. Select the "File Manager" option in the "Application Menu". The display may prompt for a login. If the login has not been changed use the default administrator login: "ADMIN" and "81440".46 7. Insert the USB flash drive. Be careful to insert it in the correct orientation into either of the USB slots. 47 47 48 8. Insert the USB flash drive. Be careful to insert it in the correct orientation into either of the USB slots.48 8. Select the "File Manager" option in the "Application Menu". The display may prompt for a login. If the login has not been changed use the default administrator login: "ADMIN" and "81440". 49 49 50 50 9. Press "P" for paths to select the paths for the file manager to display. At the "1:" prompt type: "/mnt/fl1" (without the quotes - press "SHIFT" twice to lock in lower case mode). Press "ENTER". 51 51 52 52 10. The left side of the display should show "/mnt/fl1" and the contents of your flash drive. ''If the files do not show the path may have been typed incorrectly. Repeat the previous step.''
