Changes between Version 30 and Version 31 of Docs/User/FullUpdate/VersionHistory


Ignore:
Timestamp:
10/18/11 10:25:27 (13 years ago)
Author:
Don Wilson
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • Docs/User/FullUpdate/VersionHistory

    v30 v31  
    6464=== Loader (OPI Boot loader) ===
    6565
    66 ==== Ver: 1.08v  October 12, 2011 ====
    67 Fixed problem that with more than six scale cards the parameters screen might incorrectly show and set the parameters for scale six if scale seven or above is selected.
    68 
    69 ==== Ver: 1.08u  May 13, 2011 ====
    70 Updated to allow setting SIB filter type FIR or IIR for SIB cards version 0.07 or above. Modified network setup to not show telnet option if OS version is less then 2.6.26.
    71 
    72 ==== Ver: 1.08s  Octboer 29, 2010 ====
    73 Updated main menu so option "3." is "Legal metrology information / Setup". When this is selected the options "1. View event counters", "2. View certificates / ID information" and "3. Setup menu" are shown. Options 1 and 2 are not password protected. Password will be prompted for option 3 on first access unless default operator is set to ADMIN.
    74 
    75 ==== Ver: 1.08r  Octboer 19, 2010 ====
    76 Improved ICAN diagnostics and fine span to multiply weight values by interval to show weights in calibrated weight units. Added feature to fine span cells to select multiple cells by pressing SPACE to allow multiple cells to be tweaked up or down simultaneously. Added ICAN option to show box status. DIO test will now reset outputs after test complete.
    77 
    78 ==== Ver: 1.08p  September 7, 2010 ====
    79 Improved ICAN setup to display a message when the NOVRAM is cleared and after a time delay go back to setup menu. This eliminates problem of the cell assignment display showing wrong number of cells if you do not ESCAPE out and go back in.
    80 
    81 ==== Ver: 1.08o  July 26, 2010 ====
    82 Fixed problem with DAC output level.
    83 
    84 ==== Ver: 1.08m  July 16, 2010 ====
    85 Improved “Update Software Menu” to show warning message before existing OS is erased (Continue Y/N?).
    86 
    87 ==== Ver: 1.08k  May 24, 2010 ====
    88 Added ICAN and DAC support. Fixed problem with 12 hour mode time may show as 0:00 instead of 12:00. Improved totalizer calibration parameter prompting to allow one set of inputs to configure all scales in totalizer.
    89 
    90 ==== Ver: 1.07k  Dec 17, 2008 ====
    91 Added OIML certification number to information display.
    92 
    93 ==== Ver: 1.07  November 20, 2008 ====
    94 Corrected problem with main board COM3 not being set to correct baud based on preference setting.
    9566
    9667=== Main board ===