Changes between Version 11 and Version 12 of Docs/User/FullUpdate/VersionHistory

Timestamp:

10/21/10 11:51:49 (14 years ago)

Author:

Don Wilson

Comment:

--

Docs/User/FullUpdate/VersionHistory

@@ -5 +5 @@
 
 === Update Pack 2010-10-21 ===
-==== OS: 2010-10-21 Loader: 1.08r MB: 1.17 ====
+[http://tech.825spectrum.com/trac/raw-attachment/wiki/Docs/User/FullUpdate/VersionHistory/update825-2010-10-21.zip OS: 2010-10-21 Loader: 1.08r MB: 1.17 ]
 '''OS -''' Fixed problem with weight server remote control showing blank screen and not accepting keypresses. Added feature to weight server remote control. Weight server remote control enabled can be determined by checking for existence of /tmp/wtsvr_rc_port file; when the remote control is enabled the file will contain the IP port number for remote control. Whether any clients are connected can be determined by checking for existence of /tmp/wtsvr_rc_clients file; when any clients are connected file will contain list of client IP addresses.
 '''Loader -''' Improved ICAN diagnostics and fine span to muliply weight values by interval to show weights in calibrated weight units. Added feature to fine span cells to select muliple cells by pressing SPACE to allow muliple cells to be tweaked up or down simultaneously. Added ICAN option to show box status. DIO test will now reset outputs after test complete.
@@ -11 +11 @@
 === Update Pack 2010-09-09 ===
 
-==== OS: 2010-08-18 Loader: 1.08p MB: 1.17 ====
+[http://tech.825spectrum.com/trac/raw-attachment/wiki/Docs/User/FullUpdate/VersionHistory/update825-2010-09-09.zip OS: 2010-08-18 Loader: 1.08p MB: 1.17]
 '''OS -''' Fixed problem with usb keyboard driver that if key is held down when key repeat starts indicator may crash.
 '''Loader -''' Improved ICAN setup to display a message when the NOVRAM is cleared and after a time delay go back to setup menu. This eliminates problem of the cell assignment display showing wrong number of cells if you do not ESCAPE out and go back in.
@@ -17 +17 @@
 
 === Update Pack 2010-08-18 ===
-==== OS: 2010-08-04 Loader: 1.08o MB: 1.16 ====
+[http://tech.825spectrum.com/trac/raw-attachment/wiki/Docs/User/FullUpdate/VersionHistory/update825-2010-08-18.zip OS: 2010-08-04 Loader: 1.08o MB: 1.16]
 '''Install Files -''' Fixed problem with loadsrec system file may not flash loader correctly causing standard indicator to lock up "Reading Parameters". Also fixed problem with loadsrec that after flashing the OS version may be displayed as blank.
 
 === Update Pack 2010-08-04 ===
-==== OS: 2010-08-04 Loader: 1.08o MB: 1.16 ====
+[http://tech.825spectrum.com/trac/raw-attachment/wiki/Docs/User/FullUpdate/VersionHistory/update825-2010-08-04.zip OS: 2010-08-04 Loader: 1.08o MB: 1.16]
 '''OS -''' Update to fix touch screen beep too long.
 '''Loader -''' Fixed problem with DAC card output level.
@@ -27 +27 @@
 
 === Update Pack 2010-07-22 === 
-==== OS: 2010-07-21 Loader: 1.08m MB 1.16 ====
+[http://tech.825spectrum.com/trac/raw-attachment/wiki/Docs/User/FullUpdate/VersionHistory/update825-2010-07-22.zip OS: 2010-07-21 Loader: 1.08m MB 1.16]
 '''OS -''' Fixed problem that appmenu was no longer able to perform autorun to automatically start an application after a specified number of seconds. 
 '''Loader -''' Improved “Update Software Menu” to show warning message before existing OS is erased (Continue Y/N?).
 
 === Update Pack 2010-06-28 ===
-==== OS: 2010-06-28 Loader: 1.08k MB: 1.16 ====
+[http://tech.825spectrum.com/trac/raw-attachment/wiki/Docs/User/FullUpdate/VersionHistory/update825-2010-06-28.zip OS: 2010-06-28 Loader: 1.08k MB: 1.16]
 '''OS -''' Improved mndb-comm driver. Added support for ICAN and DAC cards. Added queuing to help prevent apps from overrunning buffer and causing communications problems if requests are sent to main board with insufficient delay between requests. Added prompt on startup to allow updating indicator from USB.
 '''Loader -''' Added ICAN and DAC support. Fixed problem with 12 hour mode time may show as 0:00 instead of 12:00. Improved totalizer calibration parameter prompting to allow one set of inputs to configure all scales in totalizer. '''MB -''' Added support for ICAN cards.