Context Navigation

OptionCards

-              v24
+              v25
 Option cards cannot be updated automatically using the USB update pack. Except for the DLC card, firmware updates to the option cards require an ISP (In system programming) hardware interface and appropriate software to perform the update.
+The DLC card may be updated using a PC connected to the card with a micro USB cable.
+* Download the appropriate update zip file from the link below.
+[https://drive.google.com/file/d/1bvYMmYfKkPsnbWweeBCZAcJsf2a6K93z/view?usp=sharing Ver: 1.00.001 October 29, 2018]
+* Unzip the update package to a location on the PC such as Downloads.
+* Power off the 825.
+* Connect the USB cable to the PC and DLC card.
+* Power on the 825.
+* Run the 825DLC.bat file that was unzipped previously.
+* If "** ERROR **" appears on the PC check that the USB cable is connected to the PC and option card. Power the 825 off, wait a minute, power on, then try again.
+* The update will take several minutes. Do not disconnect until the "Press any key to continue..." display appears on the PC.
+* Power off the 825. Disconnect the USB cable from the DLC card and the PC. Power on the 825. The updated card version will show on the startup screen.
+[wiki:Docs/User/FullUpdate/DLCCardUpdate Click this link for information about updating the DLC option card]
 === DAC (Digital to Analog) ===