Changes between Version 17 and Version 18 of Docs/825gen2/Dev/UpdatingLegacyApps


Ignore:
Timestamp:
02/08/24 10:37:14 (9 months ago)
Author:
Don Wilson
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • Docs/825gen2/Dev/UpdatingLegacyApps

    v17 v18  
    775. There is now a duplicated build configuration. We will change this configuration to compile for the new 825.
    886. Right-click on the project and select "Properties...", Select "Settings" and "Tool Settings".
    9 7. Some projects might have "Cross Settings" under "Tool Settings". If so change the "Prefix" from "m68k-uclinux-" to "aarch-none-linux-gnu-" (Be sure to not leave out the final minus sign). If the "Cross Settings" is in the project the following steps 8-11 may then be skipped.
     97. Some projects might have "Cross Settings" under "Tool Settings". If so change the "Prefix" from "m68k-uclinux-" to "aarch64-none-linux-gnu-" (Be sure to not leave out the final minus sign). If the "Cross Settings" is in the project the following steps 8-11 may then be skipped.
    10108. Select "GCC C++ Compiler". The "Command:" will show "m68k-uclinux-g++". Change this to "aarch64-none-linux-gnu-g++". This changes the compiler to compile for the ARM64 architecture.
    11119. Select "GCC C++ Linker". The "Command:" will show "m68k-uclinux-g++". Change this to "aarch64-none-linux-gnu-g++". This changes the linker to link the project for the ARM64 architecture. Linking is the process of combining the already compiled code modules and libraries to create the executable.