Changes between Version 3 and Version 4 of TracCgi


Ignore:
Timestamp:
01/23/15 16:42:55 (10 years ago)
Author:
trac
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • TracCgi

    v3 v4  
    1 = Installing Trac as CGI =
     1= Installing Trac as CGI
    22
    3 {{{
    4 #!div class=important
     3{{{#!div class=important
    54  ''Please note that using Trac via CGI is the slowest deployment method available. It is slower than [TracModPython mod_python], [TracFastCgi FastCGI] and even [trac:TracOnWindowsIisAjp IIS/AJP] on Windows.''
    65}}}
    76
    87CGI script is the entrypoint that web-server calls when a web-request to an application is made. To generate the `trac.cgi` script run:
    9 {{{
     8{{{#!sh
    109trac-admin /path/to/env deploy /path/to/www/trac
    1110}}}
    12 `trac.cgi` will be in the `cgi-bin` folder inside the given path. Make sure it is executable by your web server. This command also copies `static resource` files to a `htdocs` directory of a given destination.
     11`trac.cgi` will be in the `cgi-bin` folder inside the given path. ''Make sure it is executable by your web server''. This command also copies `static resource` files to a `htdocs` directory of a given destination.
    1312
    14 == Apache web-server configuration ==
     13== Apache web-server configuration
    1514
    1615In [http://httpd.apache.org/ Apache] there are two ways to run Trac as CGI:
    1716
    1817 1. Use a `ScriptAlias` directive that maps an URL to the `trac.cgi` script (recommended)
    19  2. Copy the `trac.cgi` file into the directory for CGI executables used by your web server (commonly named `cgi-bin`). You can also create a symbolic link, but in that case make sure that the `FollowSymLinks` option is enabled for the `cgi-bin` directory.
     18 1. Copy the `trac.cgi` file into the directory for CGI executables used by your web server (commonly named `cgi-bin`). You can also create a symbolic link, but in that case make sure that the `FollowSymLinks` option is enabled for the `cgi-bin` directory.
    2019
    2120To make Trac available at `http://yourhost.example.org/trac` add `ScriptAlias` directive to Apache configuration file, changing `trac.cgi` path to match your installation:
    22 {{{
     21{{{#!sh
    2322ScriptAlias /trac /path/to/www/trac/cgi-bin/trac.cgi
    2423}}}
    … …  
    2726
    2827If you're using Trac with a single project you need to set its location using the `TRAC_ENV` environment variable:
    29 {{{
     28{{{#!apache
    3029<Location "/trac">
    3130  SetEnv TRAC_ENV "/path/to/projectenv"
    … …  
    3433
    3534Or to use multiple projects you can specify their common parent directory using the `TRAC_ENV_PARENT_DIR` variable:
    36 {{{
     35{{{#!apache
    3736<Location "/trac">
    3837  SetEnv TRAC_ENV_PARENT_DIR "/path/to/project/parent/dir"
    … …  
    4241 ''Note that the `SetEnv` directive requires enabled `mod_env` module. It is also possible to set TRAC_ENV in trac.cgi. Just add the following code between "try:" and "from trac.web ...":''
    4342
    44 {{{
     43{{{#!python
    4544    import os
    4645    os.environ['TRAC_ENV'] = "/path/to/projectenv"
    … …  
    4948 '' Or for TRAC_ENV_PARENT_DIR: ''
    5049
    51 {{{
     50{{{#!python
    5251    import os
    5352    os.environ['TRAC_ENV_PARENT_DIR'] = "/path/to/project/parent/dir"
    5453}}}
    5554
    56 If you are using the [http://httpd.apache.org/docs/suexec.html Apache suEXEC] feature please see [http://trac.edgewall.org/wiki/ApacheSuexec].
     55If you are using the [http://httpd.apache.org/docs/suexec.html Apache suEXEC] feature please see [trac:ApacheSuexec].
    5756
    5857On some systems, you ''may'' need to edit the shebang line in the `trac.cgi` file to point to your real Python installation path. On a Windows system you may need to configure Windows to know how to execute a .cgi file (Explorer -> Tools -> Folder Options -> File Types -> CGI).
    5958
    60 == Mapping Static Resources ==
     59=== Using WSGI
    6160
    62 Out of the box, Trac will pass static resources such as style sheets or images through itself. For a CGI setup this is '''highly undesirable''', because this way CGI script is invoked for documents that could be much more efficiently served directly by web server.
     61You can run a [http://henry.precheur.org/python/how_to_serve_cgi WSGI handler] [http://pythonweb.org/projects/webmodules/doc/0.5.3/html_multipage/lib/example-webserver-web-wsgi-simple-cgi.html under CGI].  You can [wiki:TracModWSGI#Thetrac.wsgiscript write your own application function], or use the deployed trac.wsgi's application.
    6362
    64 Web servers such as [http://httpd.apache.org/ Apache] allow you to create “Aliases” to resources, giving them a virtual URL that doesn't necessarily reflect the layout of the servers file system. We already used this capability by defining a `ScriptAlias` for the CGI script. We also can map requests for static resources directly to the directory on the file system, avoiding processing these requests by CGI script.
     63== Mapping Static Resources
    6564
    66 There are two primary URL paths for static resources - `/chrome/common` and `/chrome/site`. Plugins can add their own resources usually accessible by `/chrome/plugin` path, so its important to override only known paths and not try to make universal `/chrome` alias for everything.
     65See TracInstall#MappingStaticResources.
    6766
    68 Add the following snippet to Apache configuration '''before''' the `ScriptAlias` for the CGI script, changing paths to match your deployment:
    69 {{{
    70 Alias /trac/chrome/common /path/to/trac/htdocs
    71 <Directory "/path/to/www/trac/htdocs">
    72   Order allow,deny
    73   Allow from all
    74 </Directory>
    75 }}}
     67== Adding Authentication
    7668
    77 Note that we mapped `/trac` part of the URL to the `trac.cgi` script, and the path `/chrome/common` is the path you have to append to that location to intercept requests to the static resources.
    78 
    79 For example, if Trac is mapped to `/cgi-bin/trac.cgi` on your server, the URL of the Alias should be `/cgi-bin/trac.cgi/chrome/common`.
    80 
    81 Similarly, if you have static resources in a project's htdocs directory (which is referenced by /chrome/site URL in themes), you can configure Apache to serve those resources (again, put this '''before''' the `ScriptAlias` for the CGI script, and adjust names and locations to match your installation):
    82 
    83 {{{
    84 Alias /trac/chrome/site /path/to/projectenv/htdocs
    85 <Directory "/path/to/projectenv/htdocs">
    86   Order allow,deny
    87   Allow from all
    88 </Directory>
    89 }}}
    90 
    91 Alternatively to hacking `/trac/chrome/site`, you can directly specify path to static resources using `htdocs_location` configuration option in [wiki:TracIni trac.ini]:
    92 {{{
    93 [trac]
    94 htdocs_location = http://yourhost.example.org/trac-htdocs
    95 }}}
    96 
    97 Trac will then use this URL when embedding static resources into HTML pages. Of course, you still need to make the Trac `htdocs` directory available through the web server at the specified URL, for example by copying (or linking) the directory into the document root of the web server:
    98 {{{
    99 $ ln -s /path/to/www/trac/htdocs /var/www/yourhost.example.org/trac-htdocs
    100 }}}
    101 
    102 Note that in order to get this `htdocs` directory, you need first to extract the relevant Trac resources using the `deploy` command of TracAdmin:
    103 [[TracAdminHelp(deploy)]]
    104 
    105 
    106 == Adding Authentication ==
    107 
    108 The simplest way to enable authentication with Apache is to create a password file. Use the `htpasswd` program to create the password file:
    109 {{{
    110 $ htpasswd -c /somewhere/trac.htpasswd admin
    111 New password: <type password>
    112 Re-type new password: <type password again>
    113 Adding password for user admin
    114 }}}
    115 
    116 After the first user, you dont need the "-c" option anymore:
    117 {{{
    118 $ htpasswd /somewhere/trac.htpasswd john
    119 New password: <type password>
    120 Re-type new password: <type password again>
    121 Adding password for user john
    122 }}}
    123 
    124   ''See the man page for `htpasswd` for full documentation.''
    125 
    126 After you've created the users, you can set their permissions using TracPermissions.
    127 
    128 Now, you'll need to enable authentication against the password file in the Apache configuration:
    129 {{{
    130 <Location "/trac/login">
    131   AuthType Basic
    132   AuthName "Trac"
    133   AuthUserFile /somewhere/trac.htpasswd
    134   Require valid-user
    135 </Location>
    136 }}}
    137 
    138 If you're hosting multiple projects you can use the same password file for all of them:
    139 {{{
    140 <LocationMatch "/trac/[^/]+/login">
    141   AuthType Basic
    142   AuthName "Trac"
    143   AuthUserFile /somewhere/trac.htpasswd
    144   Require valid-user
    145 </LocationMatch>
    146 }}}
    147 
    148 For better security, it is recommended that you either enable SSL or at least use the “digest” authentication scheme instead of “Basic”. Please read the [http://httpd.apache.org/docs/2.0/ Apache HTTPD documentation] to find out more. For example, on a Debian 4.0r1 (etch) system the relevant section  in apache configuration can look like this:
    149 {{{
    150 <Location "/trac/login">
    151     LoadModule auth_digest_module /usr/lib/apache2/modules/mod_auth_digest.so
    152     AuthType Digest
    153     AuthName "trac"
    154     AuthDigestDomain /trac
    155     AuthUserFile /somewhere/trac.htpasswd
    156     Require valid-user
    157 </Location>
    158 }}}
    159 and you'll have to create your .htpasswd file with htdigest instead of htpasswd as follows:
    160 {{{
    161 # htdigest /somewhere/trac.htpasswd trac admin
    162 }}}
    163 where the "trac" parameter above is the same as !AuthName above  ("Realm" in apache-docs).
     69See TracInstall#ConfiguringAuthentication.
    16470
    16571----