[[PageOutline]] = Creating and using an nControl Ticket = This guide will walk you through the steps of creating an nControl ticket and transferring it to your Cardinal 825 indicator. == Creating the Ticket == 1. Start nControl and choose File -> New. Pick your printer type and then choose any of the 2xx series indicators from the dropdown. [[Image(screenshot.1.jpeg)]] 2. Create your ticket and then do File -> Export Ticket (indicator format). Save the file to a USB thumb drive. '''It is recommended that you do not use spaces in the filename.''' [[Image(screenshot.9.jpeg)]] [[Image(screenshot.2.jpeg)]] [[Image(screenshot.3.jpeg)]] == Installing the Ticket == === Using Filemanager == 1. Start the File Manager application and browse to the /mnt/flx folder where x is the usb device your ticket is on. [[Image(screenshot.4.jpeg)]] 2. Highlight the ticket file and press ENTER. Press Y to confirm and then press ENTER to install the ticket. [[Image(screenshot.5.jpeg)]] 3. Choose a slot to install the ticket to. For this guide, we will install to the standard print slot. Press ENTER. [[Image(screenshot.6.jpeg)]] 4. You can leave the '''Type''' and '''Format''' as the default values. Change the '''port''' by pressing [SPACE] to toggle through the available ports. Once you are satisified press ENTER. [[Image(screenshot.7.jpeg)]] 5. The indicator returns to the file manager. Ticket installation is complete. === Using the Transfer Utility === == Output == Below is the screenshot of the ticket printed to a terminal program. The output was captured from Truck / ID Storage. [[Image(screenshot.8.jpeg)]]