Changes between Version 10 and Version 11 of Docs/User/InstallingCustom

Timestamp:

09/25/12 14:27:15 (12 years ago)

Author:

Don Wilson

Comment:

--

Docs/User/InstallingCustom

@@ -3 +3 @@
 
 == Requirements ==
- A USB flash drive or network connection is required.
+ A USB flash drive or network connection is required. The application file should be copied to the USB flash or network share. For USB it is recommended to not have a great deal of other files on it as this may slow down or otherwise cause trouble with the scanning for files.
 
 == Installing Your Custom Application ==
 1. From the "Application Menu" select "File Manager". If the "File Manager" option is not present use the "Configuration" "Enable/Disable Menu" option to enable the file manager then go back to the application menu.
 
-[[Image(filemgr1.png)]]
+  [[Image(filemgr1.png)]]
 
 2. Updates can be performed from USB or a network share. Using a network will require that the 825 have a proper IP address and netmask setting and the network share must be reachable. The example will show using USB. Select "Choose an update file from USB Flash".
 
-[[Image(filemgr_ins_usb.png)]]
+  [[Image(filemgr_ins_usb.png)]]
 
-3. Change the left path to '''/mnt/nand/apps''' and the right path to '''/mnt/fl1'''. Your screen should be similar to the screenshot below.
+3. The display will show "Mounting USB" and after some delay as it scans files on the USB flash drive
 
-  [[Image(screenshot.1.jpeg)]]
+  [[Image(filemgr_choose_file.png)]]
 
-4. With the highlighted section on the '''left''' press the '''N''' key for (New) Dir. 
+4. Select the button with the "Application: xxxxx" showing the file name of the desired application to install or update.
 
   [[Image(screenshot.2.jpeg)]]