== Option Card Update History ==

=== DAC (Digital to Analog) ===
This cannot be updated using the USB update pack. This requires an ISP (In system programming) interface and appropriate software to update the firmware.

==== Ver: 0.01.000 February 17, 2011 ====
Original Release

=== DIO (Digital I/O Board) ===
This cannot be updated using the USB update pack. This requires an ISP (In system programming) interface and appropriate software to update the firmware.

==== Ver: 0.05.000 (Soon to be released) ====
Added pulse/PWM output feature.

==== Ver: 0.04 May 13, 2010 ====
Added counting feature.

==== Ver: 0.03 November 18, 2008 ====
Initial release

=== ICAN (ICAN Board) ===
This cannot be updated using the USB update pack. This requires an ISP (In system programming) interface and appropriate software to update the firmware.

==== Ver: 1.00 February 17, 2010 ====
Original Release

=== SIB (Scale Interface Board) ===
This cannot be updated using the USB update pack. This requires an ISP (In system programming) interface and appropriate software to update the firmware.

==== Ver: 1.07.000 July 3, 2012 ====
Changed version number to be consistent with new standard. Operation is identical to version 0.07 except for output of version information.

==== Ver: 0.07 May 6, 2011 ====
Added FIR filter option. Break Range 0 = always on, Value 2 - 64.

==== Ver: 0.06 November 18, 2008 ====
Clear weight average after calibration

==== Ver: 0.05 September 17, 2008 ====
Changed default configuration parameters for board test.

==== Ver: 0.04 July 31, 2008 ====
Added units labels to board parameters.