== Option Card Update History ==
825 Option cards cannot be updated automatically using the USB update pack. Except for the DLC card, firmware updates to the option cards require an ISP (In system programming) hardware interface and appropriate software to perform the update. 

[wiki:Docs/User/FullUpdate/DLCCardUpdate Click this link for information about updating the DLC option card]

=== DAC (Digital to Analog) ===

==== Ver: 0.01.000 February 17, 2011 ====
Original Release

=== DIO (Digital I/O) ===

==== Ver: 0.05.000 November 8, 2011 ====
Added pulse/PWM output feature.

==== Ver: 0.04 May 13, 2010 ====
Added counting feature.

==== Ver: 0.03 November 18, 2008 ====
Initial release

=== DLC (Digital Load Cell) ===

==== Ver: 1.00.001 October 29, 2018 ====
Fixed issue that if previously configured for more cells, and then changed to fewer cells the calibration may not properly set zero.

==== Ver: 1.00.000 October 25, 2018 ====
Initial Release

=== ICAN (ICAN Board) ===

==== Ver: 1.00 May 27, 2010 ====
Original Release

=== SIB (Scale Interface Board) ===

==== Ver: 1.07.000 July 3, 2012 ====
Changed version number to be consistent with new standard. Operation is identical to version 0.07 except for output of version information.

==== Ver: 0.07 May 6, 2011 ====
Added FIR filter option. Break Range 0 = always on, Value 2 - 64.

==== Ver: 0.06 November 18, 2008 ====
Clear weight average after calibration

==== Ver: 0.05 September 17, 2008 ====
Changed default configuration parameters for board test.

==== Ver: 0.04 July 31, 2008 ====
Added units labels to board parameters.