Changes between Initial Version and Version 1 of Docs/User/FullUpdate/VersionHistory/MnBd


Ignore:
Timestamp:
10/18/11 10:29:30 (14 years ago)
Author:
Don Wilson
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • Docs/User/FullUpdate/VersionHistory/MnBd

    v1 v1  
     1== Main Board Update History ==
     2
     3
     4==== Ver: 1.17  September 1, 2010 ====
     5Improved COM3 to allow TX enable/disable for RS485. Uses same command from main board as SetRTS.
     6
     7==== Ver: 1.16  February 17, 2010 ====
     8Added support for ICAN cards.
     9
     10==== Ver: 1.14  July 9, 2009 ====
     11Added support for DIO card counting feature.
     12
     13==== Ver: 1.12  June 17, 2009 ====
     14Added support for DAC card.
     15
     16==== Ver: 1.11  March 3, 2009 ====
     17Communications improvements to help prevent “Lost communications with main board”.
     18
     19==== Ver: 1.10  November 7, 2008 ====
     20Added DIO event method to remove all events and reset outputs to low state. 5B {card} 00 00 00 00 FF FF FF FF {condition empty}
     21
     22==== Ver: 1.08  Oct 15, 2008 ====
     23Fixed problem if main board received message from OPI of 2 bytes or less, which might happen due to noise, the main board would stop communicating with the OPI causing “Lost communications with main board”.