Changes between Version 2 and Version 3 of Docs/Prog/Manual/DeviceSupport/SerialPorts


Ignore:
Timestamp:
11/30/09 13:35:21 (15 years ago)
Author:
Don Wilson
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • Docs/Prog/Manual/DeviceSupport/SerialPorts

    v2 v3  
    1 == Serial Ports ==
    2 
    3 === Using Serial Ports for Linux Shell ===
     1= Serial Ports =
     2
     3== Using Serial Ports for Linux Shell ==
    44By default, the Cardinal 825 ships with the Linux console disabled. To enable it, start the indicator and press 3. Setup Menu. Next, press 4. Update Software Menu and then 3. Settings. If you see '''console=null''', remove that line. Save the settings and reboot your indicator. You will now see Linux output from COM1.
    55
    6 === Generic Serial Port Use ===
     6== Generic Serial Port Use ==
    77The “COM1” and “COM2” serial ports are routed through the main board to the MCF5329 processor on the operator interface board. These ports are controlled by the appropriate uCLinux device driver for the built in Coldfire serial ports. These ports may be accessed as:
    88