Changes between Version 18 and Version 19 of Docs/Prog/Manual/DeviceSupport/SerialPorts

Timestamp:

06/04/21 15:49:33 (4 years ago)

Author:

Don Wilson

Comment:

--

Docs/Prog/Manual/DeviceSupport/SerialPorts

@@ -371 +371 @@
 Weight field length may be prefixed with minus sign for left justified negative sign if value is negative. For example %G-6% may produce output such as "-   240". If value is positive a space will be output. Weight field length may be prefixed with a plus sign for left justified plus or minus sign to show positive or negative value. For example %G+6% may produce output such as "+ 50280" or "-   140".
 
-||=item code=||=decription=||
-||G||Gross weight||
-||T||Tare weight||
-||N||Net weight||
-||U||upper case weight units||
-||u||lower case weight units||
-||C||weight status OC=Over Capacity, MO=Motion, BZ=Below Zero, CZ=Center of Zero, two spaces=none of previous||
-||S||SMA weight status O=Over Capacity, Z=Center of Zero, one space=none of previous ||
-||M||motion status M=Motion, one space=stable||
-||a||SMA format weight output [similar to %S(scl)%1G%M(scl)%(scl)%G(scl)%%u(scl)% ] (!MnBd DLC 1.21.018 and above, or !MnBd 1.20.011 and above)||
-||b||13 spaces or length specified (!MnBd DLC 1.21.023 and above, or !MnBd 1.20.016 and above)||
+||=item code=||=decription=||=Supported revisions=||
+||G||Gross weight|| ||
+||T||Tare weight|| ||
+||N||Net weight|| ||
+||U||upper case weight units|| ||
+||u||lower case weight units|| ||
+||C||weight status OC=Over Capacity, MO=Motion, BZ=Below Zero, CZ=Center of Zero, two spaces=none of previous|| ||
+||S||SMA weight status O=Over Capacity, Z=Center of Zero, one space=none of previous || ||
+||M||motion status M=Motion, one space=stable|| ||
+||a||SMA format weight output [similar to %S(scl)%1G%M(scl)%(scl)%G(scl)%%u(scl)% ]||!MnBd DLC 1.21.018 and above, or !MnBd 1.20.011 and above||
+||b||13 spaces or length specified||!MnBd DLC 1.21.023 and above, or !MnBd 1.20.016 and above||
 
 Use three percent characters %%% to output a percent character