Context Navigation

Network

-              v8
+              v9
 }}}
+The server may be tested by running it on a networked 825. Use a PC connected to the network running a terminal program such as Hyperterm or CommView. Select the appropriate IP address of the indicator, and port 10010. In the terminal type TIME<CR> and the 825 server should respond with the time of the 825 indicator.
 === 825 TCP/IP Client Example ===
 …
 }}}
+This client program may be tested by running it on a networked 825. A PC may be connected on the network running CommView in server mode. Set the port to 3000. In the CommView make a function key to output: %02This is test%03  When this function key is pressed the 825 will display "This is a test" and the message will also be sent back to the CommView server.