Analog Output (DAC Digital to Analog Conversion) Functions

1. GetDAC
2. GetDACPercent
3. GetDACRangeFromIndex
4. GetIndexFromDACRange
5. SetDACFloat
6. SetDACOutputRange
7. SetDACPercent
8. SetDACReg
9. SetDACTrackGrossNet
10. SetDACTrackScale
11. StopDACTrackScale

Example - Application manually setting DAC output voltage

// Application should call this when starting up to initialize the DAC output
void SetupDAC(void)
{
    // Setup DAC to not track gross or net weight but be controlled manually
   DACOutputRange outputrange = dacOutput0to10V;

   if(SetDACReg(nDAC, dacAD5422Control, 0x3FF0 | (uint16)outputrange, WAIT_ACK) != OK)
       printf("\n\nSetDACOutputRange error\r\n");

   float fMaxOutput = 10.0; // Maximum output 10 volts

   if(SetDACFloat(nDAC, dacMaxOutput, fMaxOutput, WAIT_ACK) != OK)
       printf("\n\nSetDACFloat max output error\r\n");


}

// Application may call this any time change in voltage output is desired
void SetDACVoltage(float voltage)
{
     uint16 value = (uint16)(0xFFFF * (voltage / 10.0));
     SetDACReg(nDAC, dacAD5422Data, value, WAIT_ACK);
}