SetDACOutputRange

Set a DAC output range.

int SetDACOutputRange(int dev, DACOutputRange range, int wait);

Parameters

• dev - number of DAC card.
• range - dacOutput0to5V, dacOutput0to10V, dacOutput4to20mA, dacOutput0to20mA, dacOutput0to25mA
• wait - WAIT_ACK Wait for acknowledgement, NO_WAIT_ACK do not wait for acknowledgement

Return Value

• Returns the result - OK success (If WAIT_ACK may be TIMEOUT)

Remarks

The option card must already be opened by calling OpenMnBd(dev) first. If the application is using main board communication events these events may be called during the wait for acknowledgement.

Examples

   DACOutputRange outRange = dacOutput0to10V;

   // This sets the DAC output range
   if(SetDACOutputRange(dac, outRange, WAIT_ACK) != OK)
   {
       DisplayText(0, 0, "SetDACOutputRange Error");
   }

   

See Also

• ​SetDACReg
• SetDACTrackScale