= SetDACOutputRange =
Set a DAC output range.

{{{
int SetDACOutputRange(int dev, DACOutputRange range, int wait);
}}}

== Parameters ==

 * dev - number of DAC card.
 * range - dacOutput0to5V, dacOutput0to10V, dacOutput4to20mA, dacOutput0to20mA, dacOutput0to25mA
 * wait - WAIT_ACK Wait for acknowledgement, NO_WAIT_ACK do not wait for acknowledgement

== Return Value ==

 * Returns the result - OK success (If WAIT_ACK may be TIMEOUT)

== Remarks ==

The option card must already be opened by calling OpenMnBd(dev) first. If the application is using main board communication events these events may be called during the wait for acknowledgement.

== Examples ==

{{{
   DACOutputRange outRange = dacOutput0to10V;

   // This sets the DAC output range
   if(SetDACOutputRange(dac, outRange, WAIT_ACK) != OK)
   {
       DisplayText(0, 0, "SetDACOutputRange Error");
   }

   
}}}


== See Also ==

 * [http://tech.825spectrum.com/trac/wiki/Docs/Prog/Manual/ApplicationLibraries/lib825ev/DAC/SetDACOutputRange SetDACReg]
 * [wiki:SetDACTrackScale SetDACTrackScale]