= microSD Card Update =

An 825gen2 may be updated using a microSD card. This will wipe all data.

== Full Image 1.21.004 ==
||OS/Std Apps||1.21.004-00-5.15.60||
||Main board||1.21.030||
||Loader||1.21.001-2022.04||
Diagnostics Menu - OS image build date 2024-08-16

This folder contains a 7-zip compressed image file.
Extract this file to a local drive to obtain the microSD card image.
Use a program such as BelenaEtcher to write the image to a microSD card. 

**** microSD card will be fully overwritten - any existing files on card
will be lost ****

**** Be sure to check that correct destination drive is selected in 
BelenaEtcher before performing write to microSD card ****

(Preferred microSD card size at least 16G).

To install to 825:

1. Power off 825.
2. Insert microSD card in mainboard.
3. Insert boot jumper.
4. Power on 825.
5. Press "LEGAL METROLOGY INFORMATION / SETUP" button
6. Press "SETUP MENU" button
7. Press keyboard button to show on-screen keyboard and type "ADMIN"
8. Press down arrow and type password "81440"
9. Press "Install from microSD"
10. Press "Yes", press down arrow and type "CONFIRM". Press "ENTER".
11. Installation messages will appear for several minutes.
12. When finished display will show "Yocto Installed Successfully"
13. Wait for screen to return to setup menu
14. Power off 825
15. Remove the microSD card
16. Remove the boot jumper.
17. Power on the 825.
18. Confirm that 825 boots up showing the "Cardinal" startup screen

By default a new install will have COM1 enabled for diagnostics.
This will interfere with apps using COM1 for other activities such as 
bar code scanner. Perform the following steps to turn off COM1 console
mode.

1. Press "LEGAL METROLOGY INFORMATION / SETUP" button
2. Press "SETUP MENU" button
3. Press keyboard button to show on-screen keyboard and type "ADMIN"
4. Press down arrow and type password "81440"
5. Press "Communication" and "Comm Port 1 Defaults"
6. Press down arrow repeatedly until "Console:" prompt is selected.
7. Press "N" to set console to "No". Press "ENTER".