Context Navigation

History

Timestamp:: 09/18/24 10:30:02 (2 months ago)
Author:: Don Wilson
Comment:: --

Legend:

: Unmodified
: Added
: Removed
: Modified

Docs/825gen2/Updating/History

-              v30
+              v31
 [http://tech.825spectrum.com/raw-attachment/wiki/Docs/825gen2/Updating/History/upd825_2024-09-17.tgz upd825_2024-09-17.tgz] (Includes previous updates 1.21.004-01 through 1.21.004-02)
 **ID Storage** - version 1.03.193 /usr/sbin/card/ids[[BR]]
+**ID Storage** - version 1.03.193 ///usr/sbin/card/ids//[[BR]]
 Improved scoreboard output for COM3 operation to allow SB600 messages. Fixed traffic light graphic to show correctly on no screen 825 1920 x 1080 resolution.
 **DFC/Batcher** - version 1.00.09 /usr/sbin/card/batcher[[BR]]
+**DFC/Batcher** - version 1.00.09 ///usr/sbin/card/batcher//[[BR]]
 Improved DFC mode. Added a fill starting state to check that fill has started before checking for fill complete. Previously, it would sometimes start and then immediately go to fill completed.
 **File manager** - svn !r45 /usr/sbin/diag/filemanage[[BR]]
+**File manager** - svn !r45 ///usr/sbin/diag/filemanage//[[BR]]
 Fixed command line operation seg fault. This happened if "reqver" test would have shown error box due to attempt to update from incorrect version.
 **Main board** - version 1.21.032 /lib/firmware/mnbd825.elf[[BR]]
+**Main board** - version 1.21.032 ///lib/firmware/mnbd825.elf//[[BR]]
 Fixed problem with DLC sometimes getting corrupted capacity, interval, or decimal value from EEPROM. This could cause capacity display on apps to show incorrectly or weight to show "OVER CAPACITY". Debug messages for COM3 are now off by default
 …
 upd825_2024-09-13.tgz (Includes previous update 1.21.004-01)
 **ID Storage** - version 1.03.192  usr/sbin/card/ids[[BR]]
+**ID Storage** - version 1.03.192  ///usr/sbin/card/ids//[[BR]]
 Updates for SB600 scoreboard messages. "Menu", "Configuration", "Scale Info" allows threshold settings for scale state to be specified. Also options "Show Traffic Light Graphic" and "Manual Traffic Release" are added. "Configure Scoreboard" has added "Message Slots" button when SB600 is selected. This allows message slots to be specified for scale/traffic states.
 **DFC/Batcher** - version 1.00.08 /usr/sbin/card/batcher[[BR]]
+**DFC/Batcher** - version 1.00.08 ///usr/sbin/card/batcher//[[BR]]
 Improved DFC mode.
 **Setup** - svn !r222 /usr/sbin/diag/setup[[BR]]
+**Setup** - svn !r222 ///usr/sbin/diag/setup//[[BR]]
 Improved wtsvr configuration.
 **File manager** - svn !r44 /usr/sbin/diag/filemanage[[BR]]
+**File manager** - svn !r44 ///usr/sbin/diag/filemanage//[[BR]]
 Added command line capabilities to download/install updates. This is used by new "Administration" web page to allow performing update from web page.
 **Update verifier** - svn !r3 /usr/sbin/diag/c825vfy[[BR]]
+**Update verifier** - svn !r3 ///usr/sbin/diag/c825vfy//[[BR]]
 Update for web page updating
 **Weight server**  - svn !r34 /usr/sbin/diag/wtsvr[[BR]]
+**Weight server**  - svn !r34 ///usr/sbin/diag/wtsvr//[[BR]]
 Fixed issues with weight server serial communications.
 **Main board** - version 1.21.031 /lib/firmware/mnbd825.elf[[BR]]
+**Main board** - version 1.21.031 ///lib/firmware/mnbd825.elf//[[BR]]
 Added single shot I/O event to allow better filling/batching applications. Fixed issue with multi repeat sending received serial port data.
 …
 upd825_2024-08-26.tgz
 **ID Storage** - version 1.03.190 /usr/sbin/card/ids[[BR]]
+**ID Storage** - version 1.03.190 ///usr/sbin/card/ids//[[BR]]
 Fixed not able to enter temporary IDs. Fixed "Config IDs" screen showing black buttons. Fixed Zero scale not showing "CANNOT ZERO" when in motion.
 **Configuration** - svn !r16 /usr/sbin/diag/config[[BR]]
+**Configuration** - svn !r16 ///usr/sbin/diag/config//[[BR]]
 Improved print tabs setup screens.